BETA — measurements and names under active refinement. Seen a sign, a gate, or a better name? Submit an update no account needed · photos welcome via GitHub

← all climbs

Barber's Hill°

6051.5 m · net rise 275.9 m · total ascent 383.1 m · overall 4.6% · confidence: good · Llangollen · Clwyd ·

Shape: sustained — 41% of the climbing sits in a quarter of the distance; longest continuous stretch at 10%+ is 247 m.

Matches: British National Hill Climb Championship — Venue 1950 (as "Barber's Hill", Llangollen; winner Ronnie Stringwell, 4'33"). This is the road over Barber's Hill — the route passes 138 m from the OS summit point. The exact 1950 course section within it is an open question for period records or local knowledge..

° The name is provisional: this climb is not yet matched to a documented name, so it was named from nearby map places. There is no evidence of local usage — (auto-named from gazetteer (hypothesis, unreviewed); discovered as 'Discovered lane (52.9659, -3.1943)'). Corrections welcome.

≈ Overhead cover (tree canopy or structures) spans 38% of this route — detected by comparing the surface model (DSM, treetops and rooftops) against the terrain model (DTM, bare ground). Under cover the bare-ground model is built from fewer laser returns, so metre-scale readings can wobble; maxima whose window sits in a covered zone are marked ≈ below — less certain — the flag does not say whether the true value is higher or lower. Longer windows average over more clean ground and are steadier.

Gradient ladder what do windows mean?

WindowMaximumLocated at
2 m (diagnostic)≈55%2082–2084 munder overhead cover terrain reads 130.7% at 661–663 m across a structure — excluded
3 m (diagnostic)≈50%2082–2085 munder overhead cover terrain reads 104.7% at 661–664 m across a structure — excluded
5 m≈37%2157–2162 munder overhead cover terrain reads 73.7% at 660–665 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded
10 m≈31%2156–2166 munder overhead cover terrain reads 49.8% at 599–609 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded
20 m≈24.9%2329–2349 munder overhead cover terrain reads 34.8% at 591–611 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded
25 m≈21.7%2328–2353 munder overhead cover terrain reads 31.7% at 587–612 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded
50 m≈16.7%3294–3344 munder overhead cover terrain reads 25.2% at 563–613 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded
100 m≈15.8%3248–3348 munder overhead cover terrain reads 20.6% at 565–665 m across a structure and terrain that holds no road surface (dense canopy, no bench) — excluded

may start earlierdescends at end Extent detection suggests reviewing where this climb starts/ends.

Map

Check this route yourself: Google Maps route via their router · Street View at the base where coverage exists · geojson.io our exact measured line · OpenTopoMap

This climb's data: OCL JSON — the full gradient ladder, quality flags and provenance in the OpenClimb Ladder format.

Measured, not vetted. This page records what the laser record shows about the road's shape — nothing more. Nobody has necessarily ridden or inspected this road for the survey, and a page here is not a recommendation and no guarantee that the road is open, surfaced, rideable or safe. Gates, private sections, missing rights of way and hazards do not show up in elevation data. Check access and conditions on the ground and make your own judgment.

Ridden it, or know better? Submit data for this climb no account needed ·

  © OpenStreetMap contributors · topo tiles © OpenTopoMap (CC-BY-SA) · vector tiles OpenFreeMap

Barber's Hill LiDAR hillshade map with contours

Profile

The profile and gradient chart share one position — move your pointer over them and the marker follows. Colors are the gradient bands; the shaded span is the steepest 25 m.

Barber's Hill elevation profile
Barber's Hill rolling gradient profile
 

Measurement card

ElevationWelsh Government — Welsh Government LiDAR 1m DTM (2020-2023)
Resolution / CRS1.0 m grid, EPSG:27700; sampled every 1.0 m, bilinear interpolation
Tileswg_del_1_319339_20200326dtm.tif, wg_del_1_319340_20200326dtm.tif, wg_del_1_319341_20200326dtm.tif, wg_del_1_319342_20200326dtm.tif, wg_del_1_319343_20200326dtm.tif, wg_del_1_320339_20200326dtm.tif, wg_del_1_320340_20200326dtm.tif, wg_del_1_320341_20200326dtm.tif, wg_del_1_320342_20200326dtm.tif, wg_del_1_320343_20200326dtm.tif
Road centrelineOpenStreetMap (local PBF extract), snapshot 2026-08-10T20:21:40Z
Quality statusmeasurement confidence B; caveated windows: canopy or structure, no bench excluded, structure excluded
AnalysisOCL 0.1.0, analysis 0.1.0, run identifier not recorded (legacy measurement, before the campaign driver stamped runs), calculated 2026-08-12

Provenance

{
  "analysis_version": "0.1.0",
  "sample_interval_m": 1.0,
  "interpolation": "bilinear",
  "smoothing": "none",
  "gradient_windows_m": [
    5.0,
    10.0,
    20.0,
    25.0,
    50.0,
    100.0
  ],
  "diagnostic_windows_m": [
    2.0,
    3.0
  ],
  "elevation_crs": "EPSG:27700",
  "elevation_resolution_m": 1.0,
  "elevation_tiles": [
    "data/cache/wales/dtm_1m/wg_del_1_319339_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_319340_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_319341_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_319342_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_319343_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_320339_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_320340_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_320341_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_320342_20200326dtm.tif",
    "data/cache/wales/dtm_1m/wg_del_1_320343_20200326dtm.tif"
  ],
  "calculated_at": "2026-08-12T09:09:31+00:00",
  "road_source": "OpenStreetMap (local PBF extract)",
  "road_attribution": "\u00a9 OpenStreetMap contributors, ODbL",
  "osm_pbf_path": "data/cache/pbf/wales-2026-08-11.osm.pbf",
  "osm_snapshot": "2026-08-10T20:21:40Z",
  "elevation_provider": "Welsh Government",
  "elevation_dataset": "Welsh Government LiDAR 1m DTM (2020-2023)",
  "elevation_licence": "Open Government Licence v3 \u2014 \u00a9 Crown copyright Welsh Government",
  "elevation_catalogue_layer": "geonode:welsh_government_lidar_tile_catalogue_2020_2023",
  "elevation_tile_ids": [
    "wg_del_1_319339_20200326dtm.tif",
    "wg_del_1_319340_20200326dtm.tif",
    "wg_del_1_319341_20200326dtm.tif",
    "wg_del_1_319342_20200326dtm.tif",
    "wg_del_1_319343_20200326dtm.tif",
    "wg_del_1_320339_20200326dtm.tif",
    "wg_del_1_320340_20200326dtm.tif",
    "wg_del_1_320341_20200326dtm.tif",
    "wg_del_1_320342_20200326dtm.tif",
    "wg_del_1_320343_20200326dtm.tif"
  ],
  "elevation_capture_dates": [
    "26-03-2020"
  ],
  "climb_origin": "discovered",
  "renamed": "2026-08-13: 'Barber's Hill' adopted over auto-name 'Berwyn to Blaen-Bache Dingle' \u2014 1950 National HC venue evidence; human decision",
  "license": "ODbL-1.0",
  "license_url": "https://howsteep.org/licensing.html",
  "naming_note": "auto-named from gazetteer (hypothesis, unreviewed); discovered as 'Discovered lane (52.9659, -3.1943)'"
}